UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
 
FORM 10-Q
 
 
x QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended September 27, 2008
 
OR
 
o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from           to             .
 
Commission File Number: 333-124824

RBC Bearings Incorporated
(Exact name of registrant as specified in its charter)

Delaware
 (State or other jurisdiction of incorporation or organization)
95-4372080
(I.R.S. Employer Identification No.)
   
One Tribology Center
Oxford, CT
(Address of principal executive offices)
06478
(Zip Code)
   
(203) 267-7001
(Registrant’s telephone number, including area code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check One):
Large Accelerated filer Accelerated filer Non-accelerated filer  Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes No x
 
As of October 30, 2008, RBC Bearings Incorporated had 21,796,486 shares of Common Stock outstanding.



TABLE OF CONTENTS
 
3
     
ITEM 1.
Unaudited Consolidated Financial Statements
3
ITEM 2.
Management’s Discussion and Analysis of Financial Condition and Results of Operations
12
ITEM 3.
Quantitative and Qualitative Disclosures About Market Risk
19
ITEM 4.
Controls and Procedures
20
 
Changes in Internal Control over Financial Reporting
20
     
Part II - OTHER INFORMATION
21
     
ITEM 1.
Legal Proceedings
21
ITEM 1A.
Risk Factors
21
ITEM 2.
Unregistered Sales of Equity Securities and Use of Proceeds
21
ITEM 3.
Defaults Upon Senior Securities
22
ITEM 4.
Submission of Matters to a Vote of Security Holders
22
ITEM 5.
Other Information
22
Exhibits
22

2


Part I. FINANCIAL INFORMATION
ITEM 1. Financial Statements
 
RBC Bearings Incorporated
Consolidated Balance Sheets
(dollars in thousands, except share and per share data)
 
   
September 27, 
2008
 
March 29, 
2008
 
ASSETS
 
(Unaudited)
     
Current assets:
             
Cash
 
$
9,262
 
$
9,859
 
Accounts receivable, net of allowance for doubtful accounts of $1,099 at September 27, 2008 and $1,018 at March 29, 2008
   
66,836
   
66,137
 
Inventory
   
131,136
   
123,820
 
Deferred income taxes
   
5,404
   
5,567
 
Prepaid expenses and other current assets
   
9,589
   
9,976
 
Total current assets
   
222,227
   
215,359
 
Property, plant and equipment, net
   
79,718
   
73,243
 
Goodwill
   
32,832
   
31,821
 
Intangible assets, net of accumulated amortization of $4,348 at September 27, 2008 and $3,583 at March 29, 2008
   
13,266
   
11,404
 
Other assets
   
4,995
   
5,285
 
Total assets
 
$
353,038
 
$
337,112
 
           
LIABILITIES AND STOCKHOLDERS' EQUITY
             
Current liabilities:
             
Accounts payable
 
$
25,196
 
$
24,851
 
Accrued expenses and other current liabilities
   
16,167
   
13,489
 
Current portion of long-term debt
   
1,190
   
750
 
Total current liabilities
   
42,553
   
39,090
 
Long-term debt, less current portion
   
50,000
   
57,000
 
Deferred income taxes
   
6,303
   
6,064
 
Other non-current liabilities
   
11,353
   
11,048
 
Total liabilities
   
110,209
   
113,202
 
               
Stockholders' equity:
             
Preferred stock, $.01 par value; authorized shares: 10,000,000 at September 27, 2008 and March 29, 2008; none issued and outstanding
   
   
 
Common stock, $.01 par value; authorized shares: 60,000,000 at September 27, 2008 and March 29, 2008; issued and outstanding shares: 21,796,486 at September 27, 2008 and 21,782,186 at March 29, 2008
   
218
   
218
 
Additional paid-in capital
   
185,742
   
184,285
 
Accumulated other comprehensive income (loss)
   
(987
)
 
1,312
 
Retained earnings
   
61,959
   
41,688
 
Treasury stock, at cost, 129,032 shares at September 27, 2008 and 113,322 shares at March 29, 2008
   
(4,103
)
 
(3,593
)
Total stockholders' equity
   
242,829
   
223,910
 
Total liabilities and stockholders' equity
 
$
353,038
 
$
337,112
 
See accompanying notes.

3


RBC Bearings Incorporated
Consolidated Statements of Operations
(dollars in thousands, except share and per share data)
(Unaudited)
 
   
Three Months Ended
 
Six Months Ended
 
   
September 27,
2008
 
September 29,
2007
 
September 27,
2008
 
September 29,
2007
 
Net sales
 
$
94,294
 
$
78,232
 
$
186,674
 
$
158,055
 
Cost of sales
   
64,077
   
51,995
   
125,902
   
104,373
 
Gross margin
   
30,217
   
26,237
   
60,772
   
53,682
 
Operating expenses:
                         
Selling, general and administrative 
   
13,952
   
11,888
   
27,079
   
23,190
 
Other, net
   
1,097
   
354
   
1,479
   
716
 
Total operating expenses
   
15,049
   
12,242
   
28,558
   
23,906
 
Operating income
   
15,168
   
13,995
   
32,214
   
29,776
 
Interest expense, net
   
650
   
919
   
1,331
   
1,899
 
Loss on early extinguishment of debt
   
   
27
   
319
   
27
 
Other non-operating expense (income)
   
249
(238
)
166
   
(352
)
Income before income taxes
   
14,269
   
13,287
   
30,398
   
28,202
 
Provision for income taxes
   
4,681
   
4,538
   
10,127
 
9,628
 
Net income
 
$
9,588
 
$
8,749
 
$
20,271
 
$
18,574
 
Net income per common share:
                         
Basic
 
$
0.44
 
$
0.41
 
$
0.94
 
$
0.87
 
Diluted
 
$
0.44
 
$
0.40
 
$
0.93
 
$
0.85
 
Weighted average common shares:
                         
Basic
   
21,567,551
   
21,431,498
   
21,564,463
   
21,404,490
 
Diluted
   
21,761,677
   
21,813,063
   
21,771,849
   
21,800,754
 

See accompanying notes.

4


RBC Bearings Incorporated
Consolidated Statements of Cash Flows
(dollars in thousands)
(Unaudited)
 
   
Six Months Ended
 
   
September 27,
2008
 
September 29,
2007
 
Cash flows from operating activities: 
             
Net income
 
$
20,271
 
$
18,574
 
Adjustments to reconcile net income to net cash provided by operating activities:
             
Depreciation
   
5,651
   
4,411
 
Excess tax benefits from stock-based compensation
   
(99
)
 
 
Deferred income taxes
   
404
   
1,803
 
Amortization of intangible assets
   
765
   
535
 
Amortization of deferred financing costs
   
115
   
109
 
Stock-based compensation
   
1,105
   
514
 
Loss on disposition of assets
   
375
   
23
 
Loss on early extinguishment of debt (non-cash portion)
   
319
   
27
 
Changes in operating assets and liabilities, net of acquisitions:
             
Accounts receivable
   
(520
)
 
1,086
 
Inventory
   
(6,820
)
 
(7,686
)
Prepaid expenses and other current assets
   
393
   
(1,311
)
Other non-current assets
   
(1,107
)
 
(346
)
Accounts payable
   
403
   
1,774
 
Accrued expenses and other current liabilities
   
2,313
   
2,463
 
Other non-current liabilities
   
375
   
1,614
 
Net cash provided by operating activities
   
23,943
   
23,590
 
               
Cash flows from investing activities: 
             
Purchase of property, plant and equipment
   
(11,020
)
 
(11,129
)
Acquisition of businesses, net of cash acquired
   
(6,579
)
 
(7,947
)
Proceeds from sale of assets
   
525
   
14
 
Net cash used in investing activities
   
(17,074
)
 
(19,062
)
               
Cash flows from financing activities: 
             
Net increase (decrease) in revolving credit facility
   
9,000
   
(4,000
)
Exercise of stock options
   
253
   
1,384
 
Excess tax benefits from stock-based compensation
   
99
   
 
Repurchase of common stock
   
(510
)
 
(235
)
Retirement of industrial revenue bonds
   
(15,500
)
 
(1,155
)
Payments on notes payable
   
(60
)
 
 
Principal payments on capital lease obligations
   
(97
)
 
(95
)
Financing fees paid in connection with senior credit facility
   
(5
)
 
(20
)
Net cash used in financing activities
   
(6,820
)
 
(4,121
)
               
Effect of exchange rate changes on cash
   
(646
)
 
181
 
               
Cash and cash equivalents: 
             
(Decrease) increase during the period
   
(597
)
 
588
 
Cash, at beginning of period
   
9,859
   
5,184
 
Cash, at end of period
 
$
9,262
 
$
5,772
 
               
Supplemental disclosures of cash flow information: 
             
Cash paid during the period for:
             
Interest
 
$
1,218
 
$
1,548
 
Income taxes
 
$
9,840
 
$
1,891
 

See accompanying notes.

5


RBC Bearings Incorporated
Notes to Unaudited Interim Consolidated Financial Statements
(dollars in thousands, except share and per share data)

The consolidated financial statements included herein have been prepared by RBC Bearings Incorporated, a Delaware corporation (collectively with its subsidiaries, the “Company”), without audit, pursuant to the rules and regulations of the Securities and Exchange Commission. The March 29, 2008 fiscal year end balance sheet data have been derived from the Company’s audited financial statements, but do not include all disclosures required by generally accepted accounting principles in the United States. The interim financial statements included with this report have been prepared on a consistent basis with the Company’s audited financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the fiscal year ended March 29, 2008.

The consolidated financial statements include the accounts of RBC Bearings Incorporated and its wholly-owned subsidiary, Roller Bearing Company of America, Inc. (“RBCA”) and its wholly-owned subsidiaries, Industrial Tectonics Bearings Corporation (“ITB”), RBC Linear Precision Products, Inc. (“LPP”), RBC Nice Bearings, Inc. (“Nice”), RBC Precision Products - Bremen, Inc. (“Bremen (MBC)”), RBC Precision Products - Plymouth, Inc. (“Plymouth”), Tyson Bearings, Inc. (“Tyson”), Schaublin Holdings S.A. and its wholly-owned subsidiaries (“Schaublin”), RBC de Mexico S DE RL DE CV (“Mexico”), RBC Oklahoma, Inc. (“RBC Oklahoma”), RBC Aircraft Products, Inc. (“API”), Shanghai Representative office of Roller Bearing Company of America, Inc. (“RBC Shanghai”), RBC Southwest Products, Inc. (“SWP”), All Power Manufacturing Co. (“All Power”), RBC Bearings U.K. Limited and its wholly-owned subsidiary Phoenix Bearings Limited (“Phoenix”) and RBC CBS Coastal Bearing Services LLC (“CBS”), as well as the Transport Dynamics (“TDC”), Heim (“Heim”), Engineered Components (“ECD”), A.I.D. Company (“AID”), BEMD Company (“BEMD”) and PIC Design (“PIC Design”) divisions of RBCA. U.S. Bearings (“USB”) is a division of SWP and Schaublin USA is a division of Nice. All material intercompany balances and transactions have been eliminated in consolidation.

These statements reflect all adjustments, accruals and estimates consisting only of items of a normal recurring nature, which are, in the opinion of management, necessary for the fair presentation of the consolidated financial condition and consolidated results of operations for the interim periods presented. These financial statements should be read in conjunction with the Company’s audited financial statements and notes thereto included in the Annual Report on Form 10-K.

The Company operates in four reportable business segments—roller bearings, plain bearings, ball bearings, other and corporate—in which it manufactures roller bearing components and assembled parts and designs and manufactures high-precision roller and ball bearings. The Company sells to a wide variety of original equipment manufacturers (“OEMs”) and distributors who are widely dispersed geographically.

The results of operations for the three month and six month periods ended September 27, 2008 are not necessarily indicative of the operating results for the full year. The six month periods ended September 27, 2008 and September 29, 2007 each include 26 weeks. The amounts shown are in thousands, unless otherwise indicated.

Certain reclassifications have been made to prior year’s financial statements to conform with current year presentation.

Adoption of Recent Accounting Pronouncements

In September 2006, the Financial Accounting Standards Board (“FASB”) issued Statement of Financial Accounting Standard (“SFAS”) No. 157 “Fair Value Measurements” (“SFAS No. 157”) in order to establish a single definition of fair value and a framework for measuring fair value that is intended to result in increased consistency and comparability in fair value measurements. In February 2008, the FASB issued Staff Position FAS 157-2, which delayed by one year the effective date of SFAS No. 157 for all non-financial assets and non-financial liabilities, except those that are recognized or disclosed at fair value in the financial statements on a recurring basis (at least annually). The delay pertains to items including, but not limited to, non-financial assets and non-financial liabilities initially measured at fair value in a business combination, reporting units measured at fair value in the first step of evaluating goodwill for impairment, indefinite-lived intangible assets measured at fair value for impairment assessment, and long-lived assets measured at fair value for impairment assessment. The adoption of SFAS No. 157 as of the beginning of the 2009 fiscal year did not have an impact on the measurement of the Company’s financial assets and liabilities. The Company plans to adopt the remaining provisions of SFAS No. 157 as of the beginning of its 2010 fiscal year and does not expect SFAS No. 157 to have a material impact on its results of operations and financial position.

6


In February 2007, the FASB issued SFAS No. 159, “The Fair Value Option for Financial Assets and Liabilities, Including an amendment of FASB Statement No. 115,” (“SFAS No. 159”). This Statement permits entities to choose to measure many financial instruments and certain other items at fair value that are not currently required to be measured at fair value. The Company chose to not adopt the fair value measurement provisions of SFAS No. 159.

Pending Accounting Pronouncements

In December 2007, the FASB issued SFAS No. 141(R), “Business Combinations,” and SFAS No. 160, “Accounting and Reporting of Noncontrolling Interests in Consolidated Financial Statements, an amendment of ARB No. 51.” These new standards will significantly change the financial accounting and reporting of business combination transactions and noncontrolling (or minority) interests in consolidated financial statements.

In comparison to current practice, the most significant changes to business combination accounting pursuant to SFAS No. 141(R) include requirements to:

 
·
Recognize, with certain exceptions, 100 percent of the fair values of assets acquired, liabilities assumed, and noncontrolling interests in acquisitions of less than a 100 percent controlling interest when the acquisition constitutes a change in control of the acquired entity.
 
·
Measure acquirer shares issued in consideration for a business combination at fair value on the acquisition date.
 
·
Recognize contingent consideration arrangements at their acquisition-date fair values, with subsequent changes in fair value generally reflected in earnings.
 
·
With certain exceptions, recognize preacquisition loss and gain contingencies at their acquisition-date fair values.
 
·
Capitalize in-process research and development (IPR&D) assets acquired.
 
·
Expense, as incurred, acquisition-related transaction costs.
 
·
Capitalize acquisition-related restructuring costs only if the criteria in SFAS 146 are met as of the acquisition date.
 
·
Recognize changes that result from a business combination transaction in an acquirer’s existing income tax valuation allowances and tax uncertainty accruals as adjustments to income tax expense.

The premise of SFAS No. 160 is based on the economic entity concept of consolidated financial statements. Under the economic entity concept, all residual economic interest holders in an entity have an equity interest in the consolidated entity, even if the residual interest is relative to only a portion of the entity (i.e., a residual interest in a subsidiary). Therefore, SFAS No. 160 requires that a noncontrolling interest in a consolidated subsidiary be displayed in the consolidated statement of financial position as a separate component of equity because the noncontrolling interests meet the definition of equity of the consolidated entity. SFAS No. 141(R) is required to be adopted concurrently with SFAS No. 160 and is effective for business combination transactions for which the acquisition date is on or after the beginning of the first annual reporting period beginning on or after December 15, 2008, which for the Company is fiscal 2010. Early adoption is prohibited. The Company is currently assessing the impact that SFAS No. 141(R) and SFAS No. 160 will have on its results of operations and financial position.

7


In March 2008, the FASB issued SFAS No. 161, “Disclosures about Derivative Instruments and Hedging Activities, an amendment of FASB Statement No. 133.” SFAS No. 161 applies to all derivative instruments and related hedged items accounted for under SFAS No. 133, “Accounting for Derivative Instruments and Hedging Activities.” SFAS No.161 requires entities to provide greater transparency about (a) how and why an entity uses derivative instruments, (b) how derivative instruments and hedged items are accounted for under SFAS 133 and its related interpretations, and (c) how derivative instruments and related hedged items affect an entity’s financial position, results of operations, and cash flow. To meet those objectives, SFAS No. 161 requires (1) qualitative disclosures about objectives for using derivatives by primary underlying risk exposure (e.g., interest rate, credit or foreign exchange rate) and by purpose or strategy (fair value hedge, cash flow hedge, net investment hedge, and non-hedges), (2) information about the volume of derivative activity in a flexible format the preparer believes is the most relevant and practicable, (3) tabular disclosures about balance sheet location and gross fair value amounts of derivative instruments, income statement and other comprehensive income (OCI) location and amounts of gains and losses on derivative instruments by type of contract (e.g., interest rate contracts, credit contracts or foreign exchange contracts), and (4) disclosures about credit-risk-related contingent features in derivative agreements. SFAS No. 161 is effective for financial statements issued for fiscal years or interim periods beginning after November 15, 2008, which for the Company is the fourth quarter of fiscal 2009. Early application is encouraged, as are comparative disclosures for earlier periods, but neither are required. The Company does not expect SFAS No. 161 to have a material impact on its results of operations and financial position.
 
1. Acquisition

On June 6, 2008, the Company acquired the assets of Precision Industrial Components LLC (“PIC Design”) for $6,579 in cash and the assumption of certain liabilities. As a result of the acquisition, the Company recorded intangible assets of $1,055, fixed assets of $1,678, goodwill of $998, other long-term assets of $57, other long-term liabilities of $420 and $3,211 of working capital. PIC Design, located in Middlebury, Connecticut, is a manufacturer and supplier of tight-tolerance, precision mechanical components for use in the motion control industry. PIC Design is included in the Other segment. Proforma net sales and net income inclusive of PIC Design are not materially different from those previously reported.

2. Net Income Per Common Share

Basic net income per common share is computed by dividing net income available to common stockholders by the weighted-average number of common shares outstanding.

Diluted net income per common share is computed by dividing net income by the sum of the weighted-average number of common shares, dilutive common share equivalents then outstanding using the treasury stock method. Common share equivalents consist of the incremental common shares issuable upon the exercise of stock options.

The table below reflects the calculation of weighted-average shares outstanding for each period presented as well as the computation of basic and diluted net income per common share:

8


 
 
Three Months Ended
 
Six Months Ended
 
   
September 27,
2008
 
September 29,
2007
 
September 27,
2008
 
September 29,
2007
 
                   
Net income  
 
$
9,588
 
$
8,749
 
$
20,271
 
$
18,574
 
                           
Denominator for basic net income per common share—weighted-average shares 
   
21,567,551
   
21,431,498
   
21,564,463
   
21,404,490
 
Effect of dilution due to employee stock options
   
194,126
   
381,565
   
207,386
   
396,264
 
Denominator for diluted net income per common share — weighted-average shares 
   
21,761,677
   
21,813,063
   
21,771,849
   
21,800,754
 
                           
Basic net income per common share 
 
$
0.44
 
$
0.41
 
$
0.94
 
$
0.87
 
                           
Diluted net income per common share 
 
$
0.44
 
$
0.40
 
$
0.93
 
$
0.85
 
 
3. Inventory

Inventories are stated at the lower of cost or market, using the first-in, first-out method, and are summarized below:

   
September 27, 2008
 
March 29, 2008
 
Raw materials
 
$
12,155
 
$
11,561
 
Work in process
   
42,034
   
38,488
 
Finished goods
   
76,947
   
73,771
 
   
$
131,136
 
$
123,820
 

4. Comprehensive Income

Total comprehensive income is as follows:

   
Three Months Ended
 
Six Months Ended
 
   
September 27,
2008
 
September 29,
2007
 
September 27,
2008
 
September 29,
2007
 
Net income
 
$
9,588
 
$
8,749
 
$
20,271
 
$
18,574
 
Net prior service cost and actuarial losses, net of taxes
   
(13
)
 
28
   
(27
)
 
28
 
Change in fair value of derivatives, net of taxes
   
(87
)
 
   
417
   
 
Foreign currency translation adjustments
   
(1,945
)
 
980
   
(2,689
)
 
903
 
Total comprehensive income
 
$
7,543
 
$
9,757
 
$
17,972
 
$
19,505
 

5. Debt

On January 8, 2008, the Company entered into an interest rate swap agreement with a total notional value of $30,000 to hedge a portion of its variable rate debt. Under the terms of the agreement, the Company pays interest at a fixed rate (3.64%) and receives interest at variable rates. The maturity date of the interest swap is June 24, 2011. The fair value of this swap at September 27, 2008 was a liability of $77 and was included in other current liabilities. This instrument is designated and qualifies as a cash flow hedge. Accordingly, the gain or loss on both the hedging instrument and the hedged item attributable to the hedged risk are recognized in other comprehensive income.

9


On May 1, 2008, the Company voluntarily paid off the Series 1999 Industrial Revenue Bond (“IRB”), the prinicipal amount of which was $4,800. In addition, on June 2, 2008, the Company voluntarily paid off the Series 1994 A and B IRBs, the principal amounts of which were $7,700 and $3,000, respectively. The Company recorded a non-cash pre-tax charge of approximately $319 in the six month period ended September 27, 2008 to write off deferred financing costs associated with the voluntary payoff of the IRBs.  
 
The balances payable under all borrowing facilities are as follows:
 
   
September 27, 2008
 
March 29, 2008
 
KeyBank Credit Agreement
             
Five-year senior secured revolving credit facility; amounts outstanding bear interest at the prime rate or LIBOR, plus a specified margin, depending on the type of borrowing being made (prime rate 5.00% and 5.25% at September 27, 2008 and March 29, 2008, respectively, and LIBOR 3.69% and 2.69% at September 27, 2008 and March 29, 2008, respectively)
 
$
50,000
 
$
41,000
 
Note Payable, payable through September 2009
   
1,190
   
1,250
 
Industrial Development Revenue Bonds 
             
Series 1994 A, bears interest at a variable rate payable monthly through September 2017
   
   
7,700
 
Series 1994 B, bears interest at a variable rate, payable monthly through December 2017
   
   
3,000
 
Series 1999, bearing interest at variable rates, payable monthly through April 2024
   
   
4,800
 
Total Debt
   
51,190
   
57,750
 
Less: Current Portion
   
1,190
   
750
 
Long-Term Debt
 
$
50,000
 
$
57,000
 

The current portion of long-term debt as of September 27, 2008 include $440 notes payable related to the acquisitions of AID and BEMD and a $750 note payable related to the All Power acquisition.

6. Income Taxes

The Company files income tax returns in the U.S. federal jurisdiction, and various states and foreign jurisdictions. With few exceptions, the Company is no longer subject to state or foreign income tax examinations by tax authorities for years ending before March 31, 2001. The Company is no longer subject to U.S. federal tax examination by the Internal Revenue Service for years ending before March 31, 2003.

The Company does not expect any material changes to the unrecognized tax benefits within the next twelve months. There have been no material changes to the total amount of urecognized tax benefits during the three and six month periods ended September 27, 2008.

The effective income tax rates for the three and six month periods ended September 27, 2008 and September 29, 2007 were 32.8% and 34.2% and 33.3% and 34.1%, respectively. The effective income tax rates are below the U.S. statutory rate due to foreign income taxed at lower rates and a special manufacturing deduction in the U.S.

7. Reportable Segments

The Company operates through operating segments for which separate financial information is available, and for which operating results are evaluated regularly by the Company's chief operating decision maker in determining resource allocation and assessing performance. Those operating segments with similar economic characteristics and that meet all other required criteria, including nature of the products and production processes, distribution patterns and classes of customers, are aggregated as reportable segments. Certain other operating segments do not exhibit the common attributes mentioned above and do not meet the quantitative thresholds for separate disclosure, and their information is combined and disclosed as “Other.” There is also a segment reflecting corporate charges.

10


The Company has four reportable business segments engaged in the manufacture and sale of the following:
 
Roller Bearings. Roller bearings are anti-friction bearings that use rollers instead of balls. The Company manufactures four basic types of roller bearings: heavy duty needle roller bearings with inner rings, tapered roller bearings, track rollers and aircraft roller bearings.
 
Plain Bearings. Plain bearings are produced with either self-lubricating or metal-to-metal designs and consist of several sub-classes, including rod end bearings, spherical plain bearings and journal bearings. Unlike ball bearings, which are used in high-speed rotational applications, plain bearings are primarily used to rectify inevitable misalignments in various mechanical components.

Ball Bearings. The Company manufactures four basic types of ball bearings: high precision aerospace, airframe control, thin section and commercial ball bearings which are used in high-speed rotational applications.

Other. Other consists of four minor operating locations that do not fall into the above segmented categories. The Company produces precision ground ball bearing screws that offer repeatable positioning accuracy in machine tools, transfer lines, robotic handling and semiconductor equipment. The Company's Schaublin location produces precision machine tool collets that provide effective part holding and accurate part location during machining operations. The Company’s BEMD plant provides machining for integrated bearing assemblies and aircraft components for the commercial and defense aerospace markets. The Company’s PIC Design division provides tight-tolerance, precision mechanical components for use in the motion control industry.

Corporate. Corporate consists of expenses incurred at the corporate office.

Segment performance is evaluated based on segment net sales and operating income. Items not allocated to segment operating income include corporate administrative expenses and certain other amounts.

   
Three Months Ended
 
Six Months Ended
 
   
September 27, 
2008
 
September 29, 
2007
 
September 27, 
2008
 
September 29, 
2007
 
Net External Sales
                         
Roller
 
$
25,666
 
$
23,107
 
$
50,623
 
$
46,750
 
Plain
   
43,181
   
36,175
   
86,896
   
73,895
 
Ball
   
16,555
   
13,832
   
31,601
   
27,253
 
Other
   
8,892
   
5,118
   
17,554
   
10,157
 
   
$
94,294
 
$
78,232
 
$
186,674
 
$
158,055
 
 Operating Income
                         
Roller
 
$
6,770
 
$
6,666
 
$
13,858
 
$
13,885
 
Plain
   
10,955
   
9,566
   
22,042
   
19,611
 
Ball
   
3,631
   
3,204
   
7,241
   
6,661
 
Other
   
272
   
392
   
1,253
   
1,009
 
Corporate
   
(6,460
)
 
(5,833
)
 
(12,180
)
 
(11,390
)
   
$
15,168
 
$
13,995
 
$
32,214
 
$
29,776
 
 Geographic External Sales
                         
Domestic
 
$
80,182
 
$
66,708
 
$
157,280
 
$
134,961
 
Foreign
   
14,112
   
11,524
   
29,394
   
23,094
 
   
$
94,294
 
$
78,232
 
$
186,674
 
$
158,055
 
                           
Intersegment Sales
                         
Roller
 
$
2,763
 
$
2,125
 
$
5,229
 
$
4,281
 
Plain
   
411
   
233
   
1,062
   
502
 
Ball
   
2,211
   
1,857
   
4,192
   
3,433
 
Other
   
5,020
   
4,201
   
9,703
   
8,571
 
   
$
10,405
 
$
8,416
 
$
20,186
 
$
16,787
 

11


All intersegment sales are eliminated in consolidation.

8. Restructuring of Operations

In September 2008, the Company began the consolidation of its Walterboro, South Carolina plant. This consolidation resulted in a charge of $606 of which $244 was related to the net disposal and impairment of fixed assets, $197 was for impairment of excess inventory and $165 for severance costs. An additional $600 in period costs is expected to be incurred in the third quarter of this fiscal year.

ITEM 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
 
Cautionary Statement As To Forward-Looking Information 
 
The information in this discussion contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 which are subject to the “safe harbor” created by those sections. All statements other than statements of historical facts, included in this quarterly report on Form 10-Q regarding our strategy, future operations, future financial position, future revenues, projected costs, prospects and plans and objectives of management are “forward-looking statements” as the term is defined in the Private Securities Litigation Reform Act of 1995.

 The words “anticipates,” “believes,” “estimates,” “expects,” “intends,” “may,” “plans,” “projects,” “will,” “would” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements and you should not place undue reliance on our forward-looking statements. Actual results or events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements that we make. These forward-looking statements involve risks and uncertainties that could cause our actual results to differ materially from those in the forward-looking statements, including, without limitation: (a) the bearing industry is highly competitive, and this competition could reduce our profitability or limit our ability to grow; (b) the loss of a major customer could result in a material reduction in our revenues and profitability; (c) weakness in any of the industries in which our customers operate, as well as the cyclical nature of our customers’ businesses generally, could materially reduce our revenues and profitability; (d) future reductions or changes in U.S. government spending could negatively affect our business; (e) fluctuating supply and costs of raw materials and energy resources could materially reduce our revenues, cash flow from operations and profitability; (f) our products are subject to certain approvals, and the loss of such approvals could materially reduce our revenues and profitability; (g) restrictions in our indebtedness agreements could limit our growth and our ability to respond to changing conditions; (h) work stoppages and other labor problems could materially reduce our ability to operate our business; (i) our business is capital intensive and may consume cash in excess of cash flow from our operations; (j) unexpected equipment failures, catastrophic events or capacity constraints may increase our costs and reduce our sales due to production curtailments or shutdowns; (k) we may not be able to continue to make the acquisitions necessary for us to realize our growth strategy; (l) the costs and difficulties of integrating acquired businesses could impede our future growth; (m) we depend heavily on our senior management and other key personnel, the loss of whom could materially affect our financial performance and prospects; (n) our international operations are subject to risks inherent in such activities; (o) currency translation risks may have a material impact on our results of operations; (p) we may be required to make significant future contributions to our pension plan; (q) we may incur material losses for product liability and recall related claims; (r) environmental regulations impose substantial costs and limitations on our operations, and environmental compliance may be more costly than we expect; (s) our intellectual property and other proprietary rights are valuable, and any inability to protect them could adversely affect our business and results of operations; in addition, we may be subject to infringement claims by third parties; (t) cancellation of orders in our backlog of orders could negatively impact our revenues; (u) if we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud; and (v) provisions in our charter documents may prevent or hinder efforts to acquire a controlling interest in us. Additional information regarding these and other risks and uncertainties is contained in our periodic filings with the SEC, including, without limitation, the risks identified under the heading “Risk Factors” set forth in the Annual Report on Form 10-K for the year ended March 29, 2008. Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, joint ventures or investments we may make. We do not intend, and undertake no obligation, to update or alter any forward-looking statement. The following section is qualified in its entirety by the more detailed information, including our financial statements and the notes thereto, which appears elsewhere in this Quarterly Report.

12


Overview

We are an international manufacturer and marketer of highly engineered precision plain, roller and ball bearings. Bearings, which are integral to the manufacture and operation of most machines and mechanical systems, reduce wear to moving parts, facilitate proper power transmission and reduce damage and energy loss caused by friction. While we manufacture products in all major bearing categories, we focus primarily on highly technical or regulated bearing products for specialized markets that require sophisticated design, testing and manufacturing capabilities. We believe our unique expertise has enabled us to garner leading positions in many of the product markets in which we primarily compete. We have been providing bearing solutions to our customers since 1919. Over the past ten years, we have significantly broadened our end markets, products, customer base and geographic reach. We currently have 26 facilities of which 23 are manufacturing facilities in four countries.

Demand for bearings generally follows the market for products in which bearings are incorporated and the economy as a whole. Purchasers of bearings include industrial equipment and machinery manufacturers, producers of commercial and military aerospace equipment such as missiles and radar systems, agricultural machinery manufacturers, construction and specialized equipment manufacturers and automotive and commercial truck manufacturers. The markets for our products are cyclical, and general market conditions could negatively impact our operating results. We have endeavored to mitigate the cyclicality of our product markets by entering into sole-source relationships and long-term purchase orders, through diversification across multiple market segments within the aerospace and defense and diversified industrial segments, by increasing sales to the aftermarket and by focusing on developing highly customized solutions.

Outlook

Backlog, as of September 27, 2008, was $239.9 million versus $191.2 million as of September 29, 2007. Management believes that operating cash flows and available credit under the credit facility will provide adequate resources to fund internal and external growth initiatives for the foreseeable future.

Results of Operations

The following table sets forth the various components of our consolidated statements of operations, expressed as a percentage of net sales, for the periods indicated that are used in connection with the discussion herein.

13



   
Three Months Ended
 
Six Months Ended
 
   
September 27
2008
 
September 29
2007
 
September 27
2008
 
September 29
2007
 
Statement of Operations Data: 
                         
Net sales
   
100.0
%
 
100.0
%
 
100.0
%
 
100.0
%
Gross margin
   
32.0
   
33.5
   
32.6
   
34.0
 
Selling, general and administrative
   
14.8
   
15.2
   
14.5
   
14.7
 
Other, net
   
1.1
   
0.4
   
0.8
   
0.4
 
Operating income
   
16.1
   
17.9
   
17.3
   
18.9
 
Interest expense, net
   
0.7
   
1.2
   
0.7
   
1.2
 
Loss on early extinguishment of debt
   
   
   
0.2
   
 
Other non-operating income
   
0.3
   
(0.3
)
 
0.1
   
(0.2
)
Income before income taxes
   
15.1
   
17.0
   
16.3
   
17.9
 
Provision for income taxes
   
4.9
   
5.8
   
5.4
   
6.1
 
Net income
   
10.2
   
11.2
   
10.9
   
11.8
 

Three Month Period Ended September 27, 2008 Compared to Three Month Period Ended September 29, 2007

Net Sales. Net sales for the three month period ended September 27, 2008 were $94.3 million, an increase of $16.1 million, or 20.5%, compared to $78.2 million for the same period in the prior year. During the three month period ended September 27, 2008, we experienced net sales growth in all four of our business segments, driven by demand across our end markets as well as our continued efforts to supply new products to existing and new customers. Net sales to aerospace and defense customers grew 31.0% in the three month period ended September 27, 2008 compared to the same period last year, driven mainly by commercial and military aerospace aftermarket, OEM demand and the $3.2 million contribution of newly-acquired divisions AID, BEMD and PIC Design. Our net sales to our diversified industrial customers increased 9.9% in the three month period ended September 27, 2008 compared to the same period last year. The inclusion of our PIC Design acquisition contributed $1.8 million towards this increase.

The Plain Bearings segment achieved net sales of $43.2 million for the three month period ended September 27, 2008, an increase of $7.0 million, or 19.4%, compared to $36.2  million for the same period in the prior year. The commercial and military aerospace market grew $5.3 million due to an increase in airframe and aerospace bearing shipments to aircraft manufacturers, continued demand for aftermarket product and $1.5 million from the inclusion of AID. This was complemented by a $1.7 million increase in net sales to our diversified industrial customers.

The Roller Bearings segment achieved net sales of $25.7 million for the three month period ended September 27, 2008, an increase of $2.6 million, or 11.1%, compared to $23.1 million for the same period in the prior year. The commercial and military aerospace market grew $1.8 million attributable primarily to strong airframe and aerospace bearing shipments to aircraft manufacturers while general industrial demand contributed $0.8 million compared to the same period last fiscal year.

The Ball Bearings segment achieved net sales of $16.6 million for the three month period ended September 27, 2008, an increase of $2.8 million, or 19.7%, compared to $13.8 million for the same period in the prior year. Sales to the aerospace and defense segment increased $3.2 million due to continued demand from aircraft manufacturers offset by a decline in the industrial sector of $0.4 million compared to the same period last fiscal year.

The Other segment, which is focused mainly on the sale of precision ball screws, machine tool collets and precision mechanical components, achieved net sales of $8.9 million for the three month period ended September 27, 2008, an increase of $3.8 million, or 73.7%, compared to $5.1 million for the same period last year. This increase was due to increased sales of machine tool collets in Europe combined with $3.5 million from the inclusion of BEMD and PIC Design.

14


Gross Margin. Gross margin was $30.2 million, or 32.0% of net sales, for the three month period ended September 27, 2008, versus $26.2 million, or 33.5% of net sales, for the comparable period in fiscal 2008. The decrease in our gross margin as a percentage of net sales was mainly driven by start-up costs associated with our expansion into new bearing products and the inclusion of recent acquisitions which are currently operating at lower gross margin levels.

Selling, General and Administrative. SG&A expenses increased by $2.1 million, or 17.4%, to $14.0 million for the three month period ended September 27, 2008 compared to $11.9 million for the same period in fiscal 2008. As a percentage of net sales, SG&A declined to 14.8% for the three month period ended September 27, 2008 from 15.2% for the three month period ended September 29, 2007. The increase of $2.1 million was primarily due to $1.0 million related to additional personnel necessary to support our increased volume, $0.7 million from the inclusion of AID, BEMD and PIC Design and $0.4 million of incremental stock compensation expense.

Other, net. Other, net for the three month period ended September 27, 2008 increased by $0.7 million, to $1.1 million compared to $0.4 million for the comparable period in fiscal 2008. For the three month period ended September 27, 2008, other, net consisted of $0.4 million of amortization of intangibles, $0.4 million of facility moving and consolidation expenses and $0.3 million of net loss on disposal of fixed assets both related to the consolidation of our South Carolina operations. For the three month period ended September 29, 2007, other, net consisted of $0.3 million of amortization of intangibles and $0.1 million of moving expenses related to the relocation of our aircraft products manufacturing facility.

Operating Income. The increase in operating income in three of our four segments was driven primarily by volume and acquisitions. Our operating income as a percentage of net sales declined in all four of our business segments mainly driven by start-up costs associated with our expansion into new bearing products and the inclusion of recent acquisitions which are currently operating at lower gross margin levels.

Operating income was $15.2 million, or 16.1% of net sales, for the three month period ended September 27, 2008 compared to $14.0 million, or 17.9% of net sales, for the three month period ended September 29, 2007. Operating income for the Plain Bearings segment was $11.0 million for the three month period ended September 27, 2008, or 25.4% of net sales, compared to $9.6 million for the same period last year, or 26.4% of net sales. Our Roller Bearings segment achieved an operating income for the three month period ended September 27, 2008 of $6.8 million, or 26.4% of net sales, compared to $6.7 million, or 28.8% of net sales, for the three month period ended September 29, 2007. Our Ball Bearings segment achieved an operating income of $3.6 million, or 21.9% of net sales, for the three month period ended September 27, 2008, compared to $3.2 million, or 23.2% of net sales, for the same period in fiscal 2008. Our Other segment achieved an operating income of $0.3 million, or 3.1% of net sales, for the three month period ended September 27, 2008, compared to $0.4 million, or 7.7% of net sales, for the same period in fiscal 2008.

Interest Expense, net. Interest expense, net decreased by $0.2 million, or 29.3%, to $0.7 million in the three month period ended September 27, 2008, compared to $0.9 million in the same period last fiscal year, mainly driven by debt reduction.

Income Before Income Taxes. Income before taxes increased by $1.0 million, to $14.3 million for the three month period ended September 27, 2008 compared to $13.3 million for the three month period ended September 29, 2007.

Income Taxes. Income tax expense for the three month period ended September 27, 2008 was $4.7 million compared to $4.5 million for the three month period ended September 29, 2007. Our effective income tax rate for the three month period ended September 27, 2008 was 32.8% compared to 34.2% for the three month period ended September 29, 2007. The effective income tax rates are below the U.S. statutory rate due to foreign income taxed at lower rates and a special manufacturing deduction in the U.S.

15


Net Income. Net income increased by $0.9 million to $9.6 million for the three month period ended September 27, 2008 compared to $8.7 million for the three month period ended September 29, 2007.

Six Month Period Ended September 27, 2008 Compared to Six Month Period Ended September 29, 2007

Net Sales. Net sales for the six month period ended September 27, 2008 were $186.7 million, an increase of $28.6 million, or 18.1%, compared to $158.1 million for the same period in the prior year. During the six month period ended September 27, 2008, we experienced net sales growth in all four of our business segments, driven by demand across our end markets as well as our continued efforts to supply new products to existing and new customers. Net sales to aerospace and defense customers grew 24.8% in the six month period ended September 27, 2008 compared to the same period last year, driven mainly by commercial and military aerospace aftermarket, OEM demand and the $6.2 million contribution of newly-acquired divisions AID, BEMD and PIC Design. Our net sales to our diversified industrial customers increased 11.0% in the six month period ended September 27, 2008 compared to the same period last year. The inclusion of our PIC Design acquisition contributed $2.4 million towards this increase.

The Plain Bearings segment achieved net sales of $86.9 million for the six month period ended September 27, 2008, an increase of $13.0 million, or 17.6%, compared to $73.9  million for the same period in the prior year. The commercial and military aerospace market grew $10.9 million due to an increase in airframe and aerospace bearing shipments to aircraft manufacturers, continued demand for aftermarket product and $2.9 million from the inclusion of AID. This was complemented by a $2.1 million increase in net sales to our diversified industrial customers.

The Roller Bearings segment achieved net sales of $50.6 million for the six month period ended September 27, 2008, an increase of $3.8 million, or 8.3%, compared to $46.8 million for the same period in the prior year. This net sales growth was primarily attributable to general industrial demand which contributed $2.1 million combined with growth of $1.7 million from the commerecial and military aerospace market compared to the same period last fiscal year.

The Ball Bearings segment achieved net sales of $31.6 million for the six month period ended September 27, 2008, an increase of $4.3 million, or 16.0%, compared to $27.3 million for the same period in the prior year. Increased aerospace and defense demand contributed $3.6 million of the increase while sales to the industrial sector increased $0.7 million compared to the same period last fiscal year.

The Other segment, which is focused mainly on the sale of precision ball screws, machine tool collets and precision mechanical components, achieved net sales of $17.6 million for the six month period ended September 27, 2008, an increase of $7.4 million, or 72.8%, compared to $10.2 million for the same period last year. This increase was due to increased sales of machine tool collets in Europe combined with $5.7 million from the inclusion of BEMD and PIC Design.

Gross Margin. Gross margin was $60.8 million, or 32.6% of net sales, for the six month period ended September 27, 2008, versus $53.7 million, or 34.0% of net sales, for the comparable period in fiscal 2008. The decrease in our gross margin as a percentage of net sales was mainly driven by start-up costs associated with our expansion into new bearing products and the inclusion of recent acquisitions which are currently operating at lower gross margin levels.

Selling, General and Administrative. SG&A expenses increased by $3.9 million, or 16.8%, to $27.1 million for the six month period ended September 27, 2008 compared to $23.2 million for the same period in fiscal 2008. As a percentage of net sales, SG&A declined to 14.5% for the six month period ended September 27, 2008 compared to 14.7% for the comparable period last fiscal year. The increase of $3.9 million was primarily due to $2.2 million related to additional personnel necessary to support our increased volume, $1.1 million from the inclusion of AID, BEMD and PIC Design and $0.6 million of incremental stock compensation expense.

16


Other, net. Other, net for the six month period ended September 27, 2008 increased by $0.8 million, to $1.5 million compared to $0.7 million for the comparable period in fiscal 2008. For the six month period ended September 27, 2008, other, net consisted of $0.8 million of amortization of intangibles, $0.5 million of facility moving and consolidation expenses and $0.4 million of net loss on disposal of fixed assets, both primarily related to the consolidation of our South Carolina operations, offset by other miscellaneous income of $0.2 million. For the six month period ended September 29, 2007, other, net consisted of $0.5 million of amortization of intangibles and $0.2 million of moving expenses related to the relocation of our aircraft products manufacturing facility.

Operating Income. The increase in operating income in three of our four segments was driven primarily by volume and acquisitions. Our operating income as a percentage of net sales declined in all four of our business segments mainly driven by start-up costs associated with our expansion into new bearing products and the inclusion of recent acquisitions which are currently operating at lower gross margin levels.

Operating income was $32.2 million, or 17.3% of net sales, for the six month period ended September 27, 2008 compared to $29.8 million, or 18.9% of net sales, for the six month period ended September 29, 2007. Operating income for the Plain Bearings segment was $22.0 million for the six month period ended September 27, 2008, or 25.4% of net sales, compared to $19.6 million for the same period last year, or 26.5% of net sales. Our Roller Bearings segment achieved an operating income for the six month period ended September 27, 2008 of $13.9 million, or 27.4% of net sales, compared to $13.9 million, or 29.7% of net sales, for the six month period ended September 29, 2007. Our Ball Bearings segment achieved an operating income of $7.2 million, or 22.9% of net sales, for the six month period ended September 27, 2008, compared to $6.7 million, or 24.4% of net sales, for the same period in fiscal 2008. Our Other segment achieved an operating income of $1.3 million, or 7.1% of net sales, for the six month period ended September 27, 2008, compared to $1.0 million, or 9.9% of net sales, for the same period in fiscal 2008.

Interest Expense, net. Interest expense, net decreased by $0.6 million, or 29.9%, to $1.3 million in the six month period ended September 27, 2008, compared to $1.9 million in the same period last fiscal year, mainly driven by debt reduction.

Loss on Early Extinguishment of Debt. For the six month period ended September 27, 2008, loss on extinguishment of debt was $0.3 million for the non-cash write-off of deferred financing fees associated with the paydown of $15.5 million of industrial revenue bonds.

Income Before Income Taxes. Income before taxes increased by $2.2 million, to $30.4 million for the six month period ended September 27, 2008 compared to $28.2 million for the six month period ended September 29, 2007.

Income Taxes. Income tax expense for the six month period ended September 27, 2008 was $10.1 million compared to $9.6 million for the six month period ended September 29, 2007. Our effective income tax rate for the six month period ended September 27, 2008 was 33.3% compared to 34.1% for the six month period ended September 29, 2007. The effective income tax rates are below the U.S. statutory rate due to foreign income taxed at lower rates and a special manufacturing deduction in the U.S.

Net Income. Net income increased by $1.7 million to $20.3 million for the six month period ended September 27, 2008 compared to $18.6 million for the six month period ended September 29, 2007.

Liquidity and Capital Resources

Liquidity

Our credit agreement (the “KeyBank Credit Agreement”) provides the Company with a $150.0 million five-year senior secured revolving credit facility which can be increased by up to $75.0 million, in increments of $25.0 million, under certain circumstances and subject to certain conditions (including the receipt from one or more lenders of the additional commitment).

17


Amounts outstanding under the KeyBank Credit Agreement generally bear interest at the prime rate, or LIBOR plus a specified margin, depending on the type of borrowing being made. The applicable margin is based on our consolidated ratio of net debt to adjusted EBITDA from time to time. Currently, our margin is 0.0% for prime rate loans and 0.625% for LIBOR rate loans. Amounts outstanding under the KeyBank Credit Agreement are due and payable on its expiration date (June 24, 2011). We may elect to prepay some or all of the outstanding balance from time to time without penalty.
 
The KeyBank Credit Agreement allows us to, among other things, make distributions to shareholders, repurchase our stock, incur other debt or liens, or acquire or dispose of assets provided that we comply with certain requirements and limitations of the credit agreement. Our obligations under the KeyBank Credit Agreement are secured by a pledge of substantially all of our and RBCA’s assets and a guaranty by us of RBCA’s obligations. Capital expenditures (excluding acquisitions) in any fiscal year are not to exceed $30.0 million. As of September 27, 2008, $50.0 million was outstanding under the KeyBank Credit Agreement. Approximately $5.4 million of the KeyBank Credit Agreement is being utilized to provide letters of credit to secure our obligations relating to certain insurance programs. As of September 27, 2008, we had the ability to borrow up to an additional $94.6 million under the KeyBank Credit Agreement.

Schaublin’s bank credit facility (the “Swiss Credit Facility”) with Credit Suisse provides for 10.0 million Swiss francs, or approximately $9.2 million, of term loan (the “Swiss Term Loan”) and up to 4.0 million Swiss francs, or approximately $3.7 million, of revolving credit loans and letters of credit (the “Swiss Revolving Credit Facility”). Borrowings under the Swiss Credit Facility bear interest at a floating rate of LIBOR plus 2.25%. As of September 27, 2008, there were no borrowings outstanding under the Swiss Credit Facility.

On June 15, 2007, our board of directors authorized us to repurchase up to $10.0 million of our common stock from time to time on the open market, through block trades, or in privately negotiated transactions depending on market conditions, alternative uses of capital and other factors. Purchases may be commenced, suspended or discontinued at any time without prior notice. The program does not have an expiration date. As of September 27, 2008, 91,676 shares have been repurchased under this plan for an aggregate cost of $3.1 million.

On May 1, 2008, the Company voluntarily paid off the Series 1999 Industrial Revenue Bond (“IRB”), the prinicipal amount of which was $4.8 million. In addition, on June 2, 2008, the Company voluntarily paid off the Series 1994 A and B IRBs, the principal amounts of which were $7.7 million and $3.0 million, respectively. The Company recorded a non-cash pre-tax charge of approximately $0.3 million in the six month period ended September 27, 2008 to write off deferred financing costs associated with the voluntary payoff of the IRBs.

Our ability to meet future working capital, capital expenditures and debt service requirements will depend on our future financial performance, which will be affected by a range of economic, competitive and business factors, particularly interest rates, cyclical changes in our end markets and prices for steel and our ability to pass through price increases on a timely basis, many of which are outside of our control. In addition, future acquisitions could have a significant impact on our liquidity position and our need for additional funds. 

From time to time we evaluate our existing facilities and operations and their strategic importance to us. If we determine that a given facility or operation does not have future strategic importance, we may sell, partially or completely, relocate production lines, consolidate or otherwise dispose of those operations. Although we believe our operations would not be materially impaired by such dispositions, relocations or consolidations, we could incur significant cash or non-cash charges in connection with them.

18

 
Cash Flows

Six Month Period Ended September 27, 2008 Compared to the Six Month Period Ended September 29, 2007

In the six month period ended September 27, 2008, we generated cash of $23.9 million from operating activities compared to $23.6 million for the six month period ended September 29, 2007. The increase of $0.3 million was mainly a result of an increase in net income of $1.7 million, a change in operating assets and liabilities of $2.6 million and the net of non-cash charges of $1.2 million.

Cash used for investing activities for the six month period ended September 27, 2008 included $11.0 million related to capital expenditures compared to $11.1 million for the six month period ended September 29, 2007. Investing activities in the six month period ended September 27, 2008 also included $6.6 million related to the acquisition of PIC Design offset by proceeds of $0.5 million related primarily to the consolidation of our South Carolina operations.
 
Financing activities used $6.8 million in the six month period ended September 27, 2008. We used $15.5 million for the payoff of industrial revenue bonds, $0.5 million for the repurchase of common stock, $0.1 million for payments on notes payable and $0.1 million for the payment of capital lease obligations offset by a net increase in our revolving credit facility of $9.0 million, the exercise of stock options of $0.3 million and an income tax benefit of $0.1 million related to the exercise of non-qualified stock options.
 
Capital Expenditures

Our capital expenditures were $11.0 million for the six month period ended September 27, 2008. We expect to make capital expenditures of approximately $17.0 to $22.0 million during fiscal 2009 in connection with our existing business and the expansion into new bearing market segments. We intend to fund our fiscal 2009 capital expenditures principally through existing cash, internally generated funds and borrowings under our KeyBank Credit Agreement. We may also make substantial additional expenditures in connection with acquisitions.

Obligations and Commitments
 
As of September 27, 2008, there was no material change in debt and interest, capital lease, operating lease or pension and postretirement obligations as compared to such obligations and liabilities as of March 29, 2008.

ITEM 3. Quantitative and Qualitative Disclosures About Market Risk
 
Quantitative and Qualitative Disclosure About Market Risk

We are exposed to market risks, which arise during the normal course of business from changes in interest rates and foreign currency exchange rates.

Interest Rates. We are exposed to market risk from changes in the interest rates on a significant portion of our outstanding indebtedness. Outstanding balances under our KeyBank Credit Agreement generally bear interest at the prime rate or LIBOR (the London inter-bank offered rate for deposits in U.S. dollars for the applicable LIBOR period) plus a specified margin, depending on the type of borrowing being made. The applicable margin is based on our consolidated ratio of net debt to adjusted EBITDA from time to time. As of September 27, 2008, our margin is 0.0% for prime rate loans (prime rate at September 27, 2008 was 5.00%) and 0.625% for LIBOR rate loans (one month LIBOR rate at September 27, 2008 was 3.6875%).

Our interest rate risk management objective is to limit the impact of interest rate changes on our net income and cash flow. To achieve our objective, we regularly evaluate the amount of our variable rate debt as a percentage of our aggregate debt. As of September 27, 2008, our average outstanding variable rate debt, after taking into account the average outstanding notional amount of our interest rate swap agreement, was 39% of our average outstanding debt. We manage a significant portion of our exposure to interest rate fluctuations in our variable rate debt through an interest rate swap agreement. This agreement effectively converts interest rate exposure from variable rates to fixed rates of interest.

19


Based on the aggregate amount of our variable rate indebtedness of $20.0 million, a 100 basis point change in interest rates would have changed our interest expense by approximately $0.2 million per year, after taking into account the $30.0 million notional amount of our interest rate swap agreement at September 27, 2008.

Foreign Currency Exchange Rates. As a result of increased sales in Europe, our exposure to risk associated with fluctuating currency exchange rates between the U.S. dollar, the Euro, the Swiss Franc and the British Pound Sterling has increased. Our Swiss operations utilize the Swiss Franc as the functional currency, our French operations utilize the Euro as the functional currency and our English operations utilize the British Pound Sterling as the functional currency. Foreign currency transaction gains and losses are included in earnings. Approximately 16% of our net sales were denominated in foreign currencies in the the first six months of fiscal 2009 compared to 15% in the comparable period last fiscal year. We expect that this proportion is likely to increase as we seek to increase our penetration of foreign markets, particularly within the aerospace and defense markets. Foreign currency transaction exposure arises primarily from the transfer of foreign currency from one subsidiary to another within the group, and to foreign currency denominated trade receivables. Unrealized currency translation gains and losses are recognized upon translation of the foreign subsidiaries’ balance sheets to U.S. dollars. Because our financial statements are denominated in U.S. dollars, changes in currency exchange rates between the U.S. dollar and other currencies have had, and will continue to have, an impact on our earnings. We currently do not have exchange rate hedges in place to reduce the risk of an adverse currency exchange movement. Although currency fluctuations have not had a material impact on our financial performance in the past, such fluctuations may materially affect our financial performance in the future. The impact of future exchange rate fluctuations on our results of operations cannot be accurately predicted.

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements.

ITEM 4. Controls and Procedures
 
Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)) as of September 27, 2008. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, as of September 27, 2008, our disclosure controls and procedures were (1) designed to ensure that information relating to our Company required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported to our Chief Executive Officer and Chief Financial Officer within the time periods specified in the rules and forms of the U.S. Securities and Exchange Commission, and (2) effective, in that they provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

Changes in Internal Control over Financial Reporting
 
No change in our internal control over financial reporting occurred during the three month period ended September 27, 2008 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act).

20


PART II - OTHER INFORMATION

ITEM 1. Legal Proceedings
 
From time to time, we are involved in litigation and administrative proceedings which arise in the ordinary course of our business. We do not believe that any litigation or proceeding in which we are currently involved, either individually or in the aggregate, is likely to have a material adverse effect on our business, financial condition, operating results, cash flow or prospects.

ITEM 1A. Risk Factors
 
There have been no material changes to our risk factors and uncertainties during the six month period ended September 27, 2008. For a discussion of the Risk Factors, refer to Part I, Item 1A, “Risk Factors,” contained in the Company’s Annual Report on Form 10-K for the period ended March 29, 2008.

ITEM 2. Unregistered Sales of Equity Securities and Use of Proceeds
 
Unregistered Sales of Equity Securities
 
None.
 
Use of Proceeds 
 
Not applicable.

Issuer Purchases of Equity Securities 
 
On June 15, 2007, our board of directors authorized us to repurchase up to $10.0 million of our common stock from time to time on the open market, through block trades, or in privately negotiated transactions depending on market conditions, alternative uses of capital and other factors. Purchases may be commenced, suspended or discontinued at any time without prior notice. The program does not have an expiration date.

Total share repurchases for the three months ended September 27, 2008 are as follows:

Period
 
Total
 number
of shares
Purchased
 
Average
price paid
per share
 
Number of
shares
purchased 
as part of the
publicly
announced
program
 
Approximate
dollar value
of shares still
available to be
purchased
under the
program
(000’s)
 
06/29/2008–07/26/2008
   
   
   
 
$
7,113
 
07/27/2008–08/23/2008
   
5,479
 
$
30.08
   
5,479
   
6,948
 
08/24/2008–09/27/2008
   
   
   
 
$
6,948
 
Total
   
5,479
 
$
30.08
   
5,479
       

21


ITEM 3. Defaults Upon Senior Securities
 
Not applicable.
 
ITEM 4. Submission of Matters to a Vote of Security Holders
 
The Annual General Meeting of Stockholders of the Company was held on September 10, 2008. The items voted upon by the Company’s shareholders included nominations to elect three members of the Company’s board of directors and the ratification of the appointment of the Company’s Independent Registered Public Accounting Firm for fiscal 2009.
 
The shareholders voted as follows on the following matters:
 
The election of the following directors to hold office for a three-year term expiring in 2011 was approved by the following votes:
 
Dr. Michael J. Hartnett was approved by a vote of 20,499,374 shares voting for, 271,355 shares voting against and 22,861 shares withheld.
 
Dr. Thomas O’Brien was approved by a vote of 20,744,867 shares voting for, 25,876 shares voting against and 22,847 shares withheld.
 
Dr. Amir Faghri was approved by a vote of 20,760,167 shares voting for, 11,137 shares voting against and 22,286 shares withheld.
 
The ratification of the appointment of Ernst & Young LLP as the Company’s Independent Registered Public Accounting Firm for fiscal year 2009 was approved by a vote of 20,767,577 shares voting for, 7,287 shares voting against, and 18,726 shares abstaining.
 
ITEM 5. Other Information
 
Not applicable.
 
ITEM 6. Exhibits
 
Exhibit
Number
 
Exhibit Description
31.01
 
Certification of Chief Executive Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
31.02
 
Certification of Chief Financial Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
32.01
 
Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*
32.02
 
Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*
 
 
*           This certification accompanies this Quarterly Report on Form 10-Q, is not deemed filed with the SEC and is not to be incorporated by reference into any filing of the Company under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended (whether made before or after the date of this Quarterly Report on Form 10-Q), irrespective of any general incorporation language contained in such filing.

22


SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

RBC Bearings Incorporated
 
(Registrant)
     
By:
/s/ Dr. Michael J. Hartnett  
 
Name:
Dr. Michael J. Hartnett
 
Title:
Chief Executive Officer
 
Date:
November 6, 2008
     
By:
/s/ Daniel A. Bergeron   
 
Name:
Daniel A. Bergeron
 
Title:
Chief Financial Officer
 
Date:
November 6, 2008

23


EXHIBIT INDEX

Exhibit
Number
 
Exhibit Description
31.01
 
Certification of Chief Executive Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
31.02
 
Certification of Chief Financial Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
32.01
 
Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*
32.02
 
Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*

*           This certification accompanies this Quarterly Report on Form 10-Q, is not deemed filed with the SEC and is not to be incorporated by reference into any filing of the Company under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended (whether made before or after the date of this Quarterly Report on Form 10-Q), irrespective of any general incorporation language contained in such filing.

24