The AIR DUCT CLEANING Technology
There custom cleaning tech starts the duct cleaning process by removing the front panels from the air handler. There blower motor is then removed to be thoroughly cleaned and lubricated to extend the life of the motor. They then will completely wash down the interior of the cabinet removing all dirt and mold. Then they brush off the coils inside your system by hand then clean them with non-corrosive metal cleaner. In the final step, they disinfect the whole cabinet along with the coils and dry off the coils with compressed air tools to finish the entire service.
In there second step, they connect a 5000 CFM Negative air machine (Vacuum) to the air handler and proceed to seal all the vents in the house. This creates great negative pressure and helps all the dirt and mold to get sucked back through the ducts to the Vacuum.
Starting at the furthest part of the house they then will start to remove the vents and clean off all dirt and mold by hand. They will then push compressed air-lines through all the ductwork pushing the debris back to the machine. The vents and opening get disinfected put back together and the process moves on to the next vent until all the vents are finished: https://cleanductsorlando.com/faq
The blower motor gets reinstalled then the unit is fogged with a long-term EPA registered viricides. The system is checked thoroughly, and the air handler gets sealed airtight. This entire process usually takes 4-5 hours. It seems very labor intensive and tedious however, in a professional air ducts cleaner experience, it’s as close as you can get to a completely new system. By State law, duct cleaning can only be done by licensed and insured contractors. Always keep this in mind be sure to protect yourself and your home along with your family in Orlando.
Media Contact
Company Name: Clean Ducts Orlando
Email: Send Email
Phone: 407-548-7581
Address:5223 E Kaley St
City: Orlando
State: Fl 32812
Country: United States
Website: https://cleanductsorlando.com/
